[* Confirmation required *] What should I be careful about?
surely, Before ordering After reading the following, Understand the characteristics of the product Please. these Notes To Understanding and consent After receiving it Or der Thank you.
table of contents
- Request for junk mail setting
- Precautions for delivery
- Precautions common to all products
- Precautions common to license plates, frames, and signboard products
- Precautions for embossed plate
- Dog tag
- Front mirror tag
- Car flag
Request for junk mail setting
↑↑↑ Please set so that you can receive emails from here. ↑↑↑
○ Delayed confirmation of images is the cause of delayed delivery!
At our shop, we always send the image image by e-mail within [3 business days] from the order.Production will be after approval of this image, so if this confirmation is delayed, production will also be delayed and everything will be delayed.Be especially careful if you are in a hurry! Even if you order by express delivery in a hurry, if the delivery date is delayed due to the delay in image confirmation, there is no source or child.
○ If you have not received the e-mail from our shop within 3 business days after ordering, check the junk e-mail!
There are many cases where you cannot receive emails from our shop due to your email settings. Please review the settings so that you can receive emails from [firstname.lastname@example.org].
○ If you can't find the email from our shop in the junk email folder ...
Please contact us from our inquiry form.When making inquiries, please review the settings so that you can receive e-mails from the above e-mail addresses.
May be produced without approval
In our shop, basically Within 3 business days of ordering To, Sending images to customers We are doing.
but, If you cannot contact the customer for a certain period of time teeth, Short message (SMS) Registered by the customer using Resend message to mobile phone doing.
If you cannot contact the customer for a long time even after sending the SMS 、 [Production without approval] Move to Let me do it.
[Production without approval] Is sent before production Moving to production without the approval of the image Say.
This is because we couldn't contact the customer and we had to pay for it. Difficult to suspend production of your order for a long time Because.
All of our products "Made-to-order products" that are produced one by one according to the customer for, Production started once If it is done, It cannot be modified, canceled or refunded later.
for that reason, Once [Production without approval] is started, even if there is a correction, it cannot be corrected later. Please note that.
To prevent this from happening, we have explained above. Please be sure to take measures against junk mail before ordering.
Precautions for delivery
Registered Missing delivery address Or Just moved Then, go to the post office under your jurisdiction. I have not submitted a "Notice of Relocation" If you ship the item "Delivery due to unknown delivery address" Because of that The item will be returned to our shop There is a thing.
In that case, the shipping fee for the product registered for shipping once will be fixed, so if you resend it for the second time, A separate request for re-shipping is required Will be.
It will be a very wasteful cost, so when ordering Make sure that the delivery address is correct. please give me.
Just moved For those of you Submit "Notice of Relocation" to the post office before shipping the product Please.
Basically Responsibility for handling luggage after shipping products teeth, It is entrusted to the shipping company So, if there is a change after shipping, it will be described in the email notified at the time of shipping. Contact the shipping company directly from the tracking number Thank you.
Precautions common to all products
○ Difference between the color on the screen and the actual product:
The data is created on a PC, but when it is actually printed on a plate, it may be slightly darker or lighter than the color on the screen. Therefore, the color may be different from the image sent for confirmation.
○ Print unevenness and blur:
During printing, even a slight amount of print unevenness or blurring may occur due to heat conduction and how pressure is applied.Especially in winter, the ink does not come out well, and even if the temperature is controlled, fine ink scattering may be seen on the print.
○ Print near the edge:
Especially in designs where the background is entirely colored, the edges of the plate may have white lines as shown in the photo or the coating may peel off. This is due to the lines that are attached when cutting metal, which is inevitable due to the manufacturing method.
○ Made in the USA, good or bad:
Because it is an American-made plate, the quality is also American standard.The feature of American products is that they are not as delicate as those made in Japan, but rather rough.Often there are scratches from the beginning and individual differences in the position of the holes in the plate. I hope you understand this as an American-made "taste".
○ Please use and store in a place that is out of the reach of children:
It may lead to an unexpected accident. When using and storing it, please be sure to keep it out of the reach of children.
○ Scratch resistance:
It is not resistant to external damage such as scratches.If it is scratched with strong force, the external print may come off.Please note that.
○ Curved or damaged
Aluminum is a relatively soft material among metals. Therefore, it may bend even if a small amount of force is applied.Repeated bending makes the part brittle and may cut it.
FRP products are also stronger than plastics, but they can be damaged or cut if they are subjected to more than their durability.
With either material, the cut surface may be sharp, so if it is damaged, immediately stop using the product and discard it.
○ Character content that is unethical
If we judge that the character content is against general ethics, or if it is abusive or swearing that refers to a specific person or group, we may refuse to use the character content.
○ Display in alternative font
When changing from the wording of the original design to the character content desired by the customer, some designs do not have exactly the same font data as the original design, so as an alternative, we may change to a font with a similar shape.Please note.
In the above example) In the original design, if you change the part of "California" to "Welcome", it will be displayed as a substitute with a similar font.
Precautions common to license plate & signboard products
○ Sharp edges:
The edge of the plate is about 0.6mm aluminum, so it is sharp depending on the angle. Please be careful not to cut your hands when handling. When children touch it, parents should pay close attention to it and be careful not to cause an unexpected accident. Please keep away from contact with children as much as possible.
○ Print marks on the back side:
Aluminum is basically exposed on the back of the plate, but in rare cases [marks burned on another plate] may remain lightly. This is a phenomenon in which the outer frame of what was pressed before it is slightly burned when it is applied to the press. We are working to prevent this from happening as much as possible, but we apologize for the inconvenience that some may remain.
○ Outdoor use
We use UV-resistant plates and inks, but we cannot completely prevent them from fading from UV rays.After many years of use, fading has inevitably occurred. However, the degree of deterioration of the color progresses slowly.
○ Installation on vehicles
These plates are American size and cannot be installed on Japanese cars. Even if it can be installed, its use on public roads is prohibited by the Road Traffic Act.It's okay to wear it for dress-up purposes, for example in a car show, but it's a violation to drive on public roads with this plate on.
○ Optional magnet sheet
- Because it is a magnet that can be easily removed while driving if it is attached to the outside of the car. Never stick it on a running car Please.
- Never paste it within the reach of children Please.It may fall and hit your child, resulting in unexpected injury.
- Please be sure to use all of this one set for each plate. If you do not install a certain number of magnets, the magnetic force cannot withstand the weight of the plate and there is a danger that it will fall off the wall.
- Since the magnet sheet is small, there is a risk of accidental ingestion. Store in a place that is absolutely out of the reach of children Please be careful.
- Magnets may lose their magnetic force if exposed to high temperatures for extended periods of time. Not suitable for use outdoors or on hot walls Please note that.
Precautions for embossed plate
○ It will bend by all means:
Since the base material is thin aluminum, when embossed, the entire plate will be distorted and inevitably curved. We try to restore it to its original state by using rollers before shipping, but it is difficult to restore it to a clean state.
The main reason is that our plates can be produced from one piece.
For example, in order to produce from one piece, it is not possible to use a machine that is fully automated for industrial use.This is because a fully automated machine would have to prepare thousands of plates to run its production line.
In such machines, it is possible to produce using thicker plates because it can be pressed with a strong force such as hydraulic type.
However, like our shop, everything that is produced from one piece is handmade one by one by "human hands".Since there is a limit to human power, we use a thin plate and hand press each character with a stamping machine.
Therefore, it will inevitably bend.Thank you for your understanding.
○ The embossing may shift:
After printing, it is embossed according to the print.Since the metal is distorted during embossing, the embossing position and the print may inevitably deviate by several millimeters. We have adjusted it so that it does not shift as much as possible, but please understand that there is a maximum error of [about 5 mm].
○ Embossing may open holes:
When embossing, depending on the shape of the surrounding letters, the metal may stretch out and tear, leaving a hole of about 0.5 mm.We have made adjustments so that holes do not open, but the parts where the embossing force is concentrated will inevitably tear.
○ Only the main characters (1) are bumpy:
Only (1) main characters are embossed unevenly. Others are flat prints.
○ Print crushing, unevenness, and blurring of fine characters:
Since the original product is small, small letters and logos may be slightly crushed.Especially when the background color is a dark color such as black, it may be difficult to see thin lines. In addition, during printing, even a slight amount of print unevenness or blurring may occur due to heat conduction and how pressure is applied.
○ Metal allergies
The material of this product is aluminum. In addition, stainless steel and brass are used for the ball chain.If you have a metal allergy, please be careful when handling it.
○ Installation on pets:
The chain may break due to the violent movement of the pet. Also, because it is a small product, pets may accidentally swallow it.Use it only when the owner's eyes can see it, and never leave it on your pet.It may lead to an unexpected accident.
Front mirror tag
○ Product curvature and individual differences:
The material used for the front mirror tag has the property of expanding and contracting when printing a print. Since printing is done on one side at a time, there may be individual differences even if the exact same data is printed on the front and back due to the difference between before and after expansion and contraction. Also, when expansion and contraction due to heat occurs, the temperature is different on the front and back, so it may bend slightly.Please note that.
○ Precautions when soaking in fragrance:
Please prepare the fragrance yourself.We recommend using an atomizer when spraying fragrances.If the fragrance itself is colored, that color may be transferred to the product.If a large amount of soaked material is left in the car as it is, flammable materials may cause a fire, so please refrain from doing so. Also, if you inhale a large amount of fragrance in a small space, it may induce asthma in rare cases, although there are individual differences. If your child has a respiratory illness, it may induce asthma more sensitively than an adult, so it is recommended that you do not soak in the fragrance.
○ Do not pinch strongly! & Don't open the window too much!
If the pole is pinched too tightly when installing the flag, the power window may be damaged, the pole body may be damaged, or the window frame packing may be damaged.Lightly hit the window frame.On the other hand, if you open the window too much, it may fly away due to the wind, which is extremely dangerous.
○ The glass and body may be scratched.
Since the flag is designed to be sandwiched between windowpanes, the parts that come into contact with it may be scratched. In addition, the flag blown by the wind may hit the body and cause scratches.Please note.
○ Be sure to check the strength before installing and running!
We use materials that are resistant to sunlight and rain, but if they are used continuously for many years, they may deteriorate over time and be damaged.Before installing the product, push or pull it by hand to check its strength before installing it.In the unlikely event that it is damaged while driving and causes an accident, the responsibility will be placed on the driver.Please note that we are not responsible for any incidents or accidents caused by the user's misuse.
○ Do not open the window with the flag while driving!
If you open the window with the flag even a little, the clip may be blown off by the wind and fly away.Especially when installing it in the window of the seat where children can sit, please be careful not to open the window by locking the child.
○ Please refrain from using on rainy days.
Moisture can make the cloth heavier and can be damaged by the force that the pole cannot support.During heavy rains and storms, the risk of damage is further increased, leading to unexpected accidents.Please refrain from using it on rainy days.
○ Please remove it when you leave the car!
There is a risk of theft.Be sure to remove it when you leave the car, as the window glass may be broken through the gaps in the windows that are slightly open.
○ Please be careful about the size that can be pushed out of the car.
Since the flag is installed by sandwiching it in the window, it is basically installed so that it protrudes upward.The Road Law generally stipulates that the maximum height that can be pushed out of a car is 3.8 m from the ground. (To be exact, it is "3.8 meters minus the height of the place where the car is loaded.") When installing the flag, please be careful so that it is within 3.8 m from the ground.
○ Print quality
Since each item is manufactured by hand, slight print misalignment, color unevenness, print blurring, color transfer, etc. may occur.Please note that the color tone may differ slightly between the image sent for proofreading and the actual product.
○ About care
If it gets dirty, be sure to wash it by hand using a general laundry detergent. The flag cannot be removed from the pole, so wash the entire pole.Do not wash in the washing machine as it may damage the pole or damage the inside of the washing machine. Also, if you wash it with other laundry, the color may transfer, so please be careful not to mix and wash.Finally, the dryer cannot be used, so be sure to let it air dry.
○ Small bubbles
All of our stickers are coated with PVC vinyl. When applying this coating, small bubbles may inevitably enter. Please note that this is unavoidable due to the manufacturing method.
Complaints in the above items are not covered by compensation. In addition, we do not take any responsibility for accidents and incidents that occur when we do not use our products correctly. If you do not agree, please do not place your order.